Drainage System Solution

General Product Specifications on DSS Floor Channels & Floor Gratings

PDF

DSS Catalog on Floor Gratings & Channels

PDF
  • DSS Gratings & Channels Presentation (Updated December 25, 2022)
PDF

Floor Gratings

DSS floor gratings can be made in any sizes as desired / required, using #304 stainless steel, hairline finishing; 5mm thick for the exterior / outside frame; 3mm thick for the interior sections / dividing bars with slip-resistant on one side and plain on the other side; Gratings are 25mm in height with a Minimum Point Load: 150 kg per square meter.

DSS gratings are made by using the state-of-the-art arc-welding (full & continuous welding) for smooth and clean surface/appearance with maximum strengths.

Slot sizes are in rectangular shape, which would allow easy cleaning and hosing down any dirt and unwanted materials.

DSS gratings are exceptionally strong, which can sustain heavy loads and will last much longer. DSS grating can support a minimum point load of 150 kg per square meter.

Modular structure of gratings also makes cleaning much easier and convenient when needed.  Furthermore, gratings can be made in any sizes according to the floor sinks/pans/channels sizes.

The grating weight and size has been taken into full consideration in design and making the modular structure of gratings to avoid and to prevent back injury which might occur while lifting up or laying down heavy gratings.

Floor Channels/Pans

DSS CHANNELS (Centre-Outlet)

DSS floor channels/pans are made in 1.5mm thick #304 stainless steel as standard, hairline finishing with one or more multiple water connections, with or without an odour trap, depending on the site and project requirement. Floor pans and channels can also be made with side inlet(s) for multi-connections.

Floor channels / pans can be custom-made in #316 stainless steel, or in 2.0mm thick or up to 3.0mm thick, in any depth in any shape, and in any configuration according to site requirements and specifications.

* Floor sinks/pans/channels can be made with rounded corners and rounded edges for maximum hygiene and sanitation purpose.

Floor Channels/Pans

DSS CHANNELS (End-Outlet)

DSS floor channels/pans are made in 1.5mm thick #304 stainless steel as standard, hairline finishing with one or more multiple water connections, with or without an odour trap, depending on the site and project requirement. Floor pans and channels can also be made with side inlet(s) for multi-connections.

Floor channels / pans can be custom-made in #316 stainless steel, or in 2.0mm thick or up to 3.0mm thick, in any depth in any shape, and in any configuration according to site requirements and specifications.

* Floor sinks/pans/channels can be made with rounded corners and rounded edges for maximum hygiene and sanitation purpose.

DSS Floor Sinks/Pans/Channels can be made sideway connections, side inlets into the floor sinks/pans.  All floor sink/pans are in 1.5mm thick #304 stainless steel as standard.  However, if required, all can be made in 2.0mm, 2.5mm or even up to 3.0mm thick #304 or #316 stainless steel in any depth, in any shape and configuration according to the site requirements and specifications.

Shopping Basket